433mhz DC 3.6V 6V 12V 24V 1CH Relay Wireless RF Remote Control Switch Module With 4buttons Transmitter Power LED Lamp Light DIY

Technical Data Of Transmitter:

Operating frequency: 433MHz
Power by 2 Pcs CR2016 Battery (Battery included )
Material: PVC;
Button: 4 buttons;
Size: 60mm x 30mm;
Operating voltage: 3V ;
Operating Current: 12mA;
Transmitting power: 10mw;
Modulation mode: ASK (AM).
Encoding type: Learning.
Transfers distance: 20~80m

Technical Data Of Receiver Module:

Input Power:DC 3.6~24V
Max current:3 A
RF Frequency: 433Mhz
Working temperature:-30~+80
RF working mode:superheterodyne
Receive sensitivity: >97dbm
Transmitting distance: more than 50 m ( open space)
Remote storage:10pcs
Support remote type: Learning code 1527code, Fixed code(Rolling code can be design)
Working mode:Momentary, Toggle, Latching mode
Wiring type:fixed termina
Dimension of PCB: 22.5 x 11 (mm)

Note:The products in our store all work in 433Mhz.We can not make sure that different frequency product can connect with each other.If you have any questions about our products,please ask our customer service.We are always willing to help.

Perfect Craft & Detail Control

choose different options to place an order

Wiring Diagram

operating mode

You can match the Transmitter with the Relay Receiver Module in 3 modes.

Momentary Mode:

1. Press and hold one button, relay will turn on;

2. Release the button, this relay will turn off.

Toggle Mode:
1. Press button "A", relay will turn on;

2. Press button "A" again, this relay will turn off.

Latched mode:

1. Press button "A", relay will turn on;

2. Press button "B", this relay will turn off.

Delete the existing data about operating modes

Press the learning button (on the Receiver) 8 times. The existing data will be deleted succeed.

Note:

1. When you receive our products, it may set in one remote mode randomly, that because each product was tested before it can be arranged to shipment. So, please delete the existing data to first use.

2. After deleted the data, all the remote controls cannot work any more.

Set up

Set up(Momentary)

1. Press the learning button(on the Receiver) once. Wait for 3 seconds;

2. Press one button on the remote control. Wait for 3 seconds. Succeed.

Set up(Toggle)

1. Press the learning button(on the Receiver) twice. Wait for 3 seconds;

2. Press one button on the remote control. Wait for 3 seconds. Succeed.

Set up(Latched)

1. Press the learning button(on the Receiver) third times. Wait for 3 seconds;

2. Press button "A" on the remote control. Wait for 3 seconds.

3. Press button "B" on the remote control. Wait for 3 seconds. Succeed.

*If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*

*We have our own factory.Please let us know if you have some OEM projects.We are willing to get a cooperation with you.*

433mhz DC 3.6V 6V 12V 24V 1CH relæ trådløs RF fjernbetjening switch modul med 4 knapper sender strøm LED lampe lys DIY